Exhibit 1.01

QuickLogic Corporation

Conflict Minerals Report

For The Reporting Period from January 1, 2024 to December 31, 2024

Introduction

This Conflict Minerals Report (the “Report”) of QuickLogic Corporation (“QuickLogic”, “we”, “our”, or the “Company”) has been prepared pursuant to Rule 13p-1 and Form SD (the “Rule”) promulgated under the Securities Exchange Act of 1934, as amended, for the reporting period January 1, 2024 to December 31, 2024 (the "Reporting Period").

Rule 13p-1, through Form SD, requires the disclosure of certain information if a company manufactures or contracts to manufacture products for which certain "conflict minerals" (as defined below) are necessary to the functionality or production of such products. Form SD defines "conflict minerals" as: (i)(a) columbite-tantalite (or coltan, the metal ore from which tantalum is extracted), (b) cassiterite (the metal ore from which tin is extracted), (c) gold, and (d) wolframite (the metal ore from which tungsten is extracted), or their derivatives, which are currently limited to tantalum, tin, and tungsten; or (ii) any other mineral or its derivatives determined by the U.S. Secretary of State to be financing conflict in the Democratic Republic of the Congo or an "adjoining country," as such term is defined in Form SD (collectively, the "Covered Countries"). The “Covered Countries” for purposes of the Rule and this Report are the Democratic Republic of Congo (the “DRC”), the Republic of Congo, the Central African Republic, South Sudan, Uganda, Rwanda, Burundi, Tanzania, Zambia and Angola.

Our operations may at times manufacture, or contract to manufacture, products for which conflict minerals are necessary to the functionality or production of those products (collectively, the "Covered Products"). As required by Form SD, we have conducted a good faith reasonable country of origin inquiry ("RCOI") regarding the conflict minerals included in its Covered Products during the Reporting Period to determine whether any such Conflict Minerals originated in the Covered Countries and/or whether any of the Conflict Minerals were from recycled or scrap sources. Where applicable, we have conducted additional due diligence regarding the sources of the Conflict Minerals. The results of our RCOI regarding the Conflict Minerals, as well as our additional due diligence regarding the sources of such Conflict Minerals, are contained in this Report, which is publicly available at http://ir.quicklogic.com. The reference to the Company's website is provided for convenience only, and its contents are not incorporated by reference into this Form SD, nor are they deemed "filed" with the U.S. Securities and Exchange Commission pursuant to the Exchange Act or the Securities Act of 1933, as amended.

Overview

QuickLogic Corporation is a fabless semiconductor company with a variety of products: embedded FPGA ("eFPGA") intellectual property ("IP"), low power, multi-core semiconductor system-on-chips ("SoCs"), and discrete FPGAs. QuickLogic's customers can use its eFPGA IP for hardware acceleration and pre-processing in their Application Specific Integrated Circuit ("ASIC") products, the Company's SoCs to run its customers' software and build their hardware around, and the Company's discrete FPGAs to implement their custom functionality. The Analytics Toolkit from SensiML Corporation ("SensiML"), the Company’s wholly owned subsidiary, provides an end-to-end Artificial Intelligence / Machine Learning solution with accurate sensor algorithms using AI technology. The full range of products, software tools, and eFPGA IP enables the practical and efficient programmability for the Company's customers across Aerospace and Defense, Consumer/Industrial Internet-of-Things ("IoT"), and Consumer Electronics markets.

The Company conducted an analysis of the products that it contracted to be manufactured during the Reporting Period and reasonably determined certain Conflict Minerals, primarily gold, tantalum, tin, and tungsten, are necessary to the functionality or production of the majority of its products.

Description of the Company’s Reasonable Country of Origin Inquiry

As described in this Report, we have determined that the following Conflict Minerals, namely gold, tantalum, tin and tungsten, are necessary to the functionality or production of products contracted to be manufactured by us during the Reporting Period. As a result, we conducted in good faith a reasonable country of origin inquiry (“RCOI”) reasonably designed to determine if any of these Conflict Minerals originated in the Covered Countries and whether any of the Conflict Minerals may be from recycled or scrap sources, in accordance with Form SD and related guidance provided by the Securities and Exchange Commission ("SEC"). Our supply chain is complex and there are many third parties in the supply chain between the ultimate manufacturer of the Covered Products and the original sources of Conflict Minerals. The Company does not directly purchase Conflict Minerals from mines, smelters or refiners. Therefore, the Company must rely on suppliers to provide information regarding the country of origin of Conflict Minerals that are included in the Covered Products. In designing our RCOI, we employed a combination of measures to determine whether the Conflict Minerals in our Covered Products originated from the Covered Countries and determined that the Company would survey each of its Tier 1 suppliers.

As such, our RCOI primarily consisted of utilizing the Conflict Minerals Reporting Template (“CMRT”) prepared by the Responsible Minerals Initiative ("RMI"), an initiative of the Responsible Business Alliance and Global e-Sustainability Initiative for Tier 1 suppliers of our devices in 2024. Only CMRT’s 6.4 or higher were accepted. Responses were reviewed for completeness, reasonableness and consistency, and we routinely followed up for any corrections and clarifications. During 2024, we contracted with Source 44 LLC dba Source Intelligence, a third-party vendor to coordinate the efforts of receiving and analyzing the CMRTs. Through Source Intelligence’s database, we received detailed information regarding the smelters/refiners and associated mine countries reported in our supply chain.

We submitted this template to four (4) Tier 1 suppliers and received a 100% response rate. Of these responding suppliers, 100% indicated one or more of the Conflict Minerals are necessary to the functionality or production of the products supplied.

Description of the Company’s Due Diligence Process

Based on this information, we performed additional due diligence on the source and chain of custody of these Conflict Minerals. The Company's due diligence measures have been designed to conform to the framework in the Organization for Economic Co-operation and Development Due Diligence Guidance for Responsible Supply Chain of Minerals from Conflict-Affected and High Risk Areas: Second Edition, including the related supplements on gold, tin, tantalum and tungsten (the "OECD Guidance"). The OECD Guidance is an internationally recognized due diligence framework.

In accordance with the five-step OECD Guidance, the design of our due diligence includes, but is not limited to, the following five steps: (i) establishment of strong company management systems, (ii) identification and assessment of risks in the supply chain, (iii) designing and implementing a strategy to respond to identified risks, (iv) carrying out an independent third-party audit of smelter/refiner’s due diligence practices and (v) reporting on supply chain due diligence. A description of certain activities undertaken by us in respect of each of the five steps of the OECD Guidance is described below.

We have completed a number of steps to establish a management system for addressing the sourcing of Conflict Minerals in our Covered Products. These actions include:

Our Policy notes the Company’s support of the industry-wide efforts the Responsible Business Alliance and Global e-Sustainability Initiative are making to address responsible sourcing of minerals through the development of the Responsible Minerals Initiative. Our policy discusses the Company’s adoption and use of the industry-standard CMRT created by the Responsible Business Alliance and Global e-Sustainability Initiative to collect sourcing information related to conflict minerals as an element of our reasonable country of origin inquiry to verify the responsible sourcing of materials and to support compliance with SEC regulations. Listed below under the Findings are the results of the sourcing of minerals provided by the Tier 1 suppliers.

Because of our position within our supply chain, it is difficult to identify actors upstream from our Tier 1 suppliers. As discussed above, we identified Tier 1 suppliers and we have relied upon them to provide us with the necessary information about the source of Conflict Minerals contained in the products they manufacture on our behalf. Our suppliers are similarly reliant upon information provided by their suppliers to provide information regarding the country of origin of Conflict Minerals that are included in the Covered Products.

We request each of them to complete the CMRT and review the sourcing information provided in response to our requests for accuracy and completeness. In the event we find the responses to the Reporting Template unclear or incomplete, we contact the supplier in question for additional information and clarification. In some cases, we may contact the smelter or refiner directly to obtain information. We intend to contact each of our suppliers at least once per year to check on the status of their continuing due diligence and to obtain updated information. We record all information obtained from the CMRT to identify the smelters and refiners in our supply chain. The list of the smelters and refiners in our supply chain are verified against the lists compiled by the Responsible Minerals Initiative, TI-CMC, LBMA and RJC to determine which smelters and refiners have been determined to be compliant with the Responsible Minerals Assurance Process assessment protocols and certifications.

In response to this risk assessment, the Company has an approved risk management plan which is implemented, managed, and monitored by the Vice President of Operations under the oversight of our Board of Directors. Any identified potential risks or quality control flags raised during the evaluation of supplier responses are noted on the Source Intelligence platform and reviewed by the team. We support the continued efforts of the Responsible Minerals Initiative to complete the audits of smelters that have agreed to date to participate in the Responsible Minerals Assurance Process and to encourage other identified smelters to become participants.

As a continuing part of our risk management plan, we have communicated our commitment to the use of conflict-free minerals in the manufacture of our Covered Products and our expectation that the manufacture of our Covered Products will be conflict-free.

We do not have a direct business relationship with any smelters or refiners in our supply chain and, as a result, we do not directly conduct or request audits. Instead, we support the development and implementation of independent third-party audits of smelters by encouraging our suppliers to purchase materials from smelters in conformance with RMI standards and determine whether the smelters that were used to process these minerals were validated as in conformance with RMI standards as part of the Responsible Minerals Assurance Process. We monitor smelters' or refiners' conformance status with Source Intelligence and the Responsible Minerals Initiative.

In 2025, we publicly filed the Form SD and this Report with the SEC, and a copy of this Report and the Form SD are publicly available at http://ir.quicklogic.com.

This Report includes information about the RCOI methodology utilized by the Company, the design of our due diligence process in conformance with the OECD Guidelines, and the list of known smelters utilized in our supply chain identified in our due diligence process.

Findings

Based on the information that was provided by the Company’s Tier 1 suppliers and otherwise obtained through the due diligence process, the Company believes that, to the extent reasonably determinable by the Company, the facilities that were used to process the Conflict Minerals contained in the Covered Products include the smelters and refiners listed below. As of June 2, 2025, 214 of the 219 smelters below were in conformance with the standards as established by the Responsible Minerals Initiative’s RMAP. The remaining five smelters identified by our suppliers were not yet participating in the RMAP assessment. Of these, the Company was unable to determine the location of four smelters and/or the locations or mine of origin of the 3TG sourced from these four smelters. For these five smelters, we took the risk mitigation steps discussed earlier in this Report, which include, but are not limited to, engaging only with major wafer and assembly vendors, informing our vendors of our conflict minerals requirements, and asking suppliers that list non-certified smelters to avoid purchasing material from those smelters or to work with them to get those smelters certified. All five of these smelters were used by only one of our suppliers, which supplies the following products:

Additionally, there is an indication of DRC sourcing for 40 smelters/refiners used. The 219 smelters are as follows:

Countries of origin that these facilities may source Conflict Minerals include:

L1 - RMI Level 1 Countries are those that are not identified as conflict regions or plausible areas of smuggling or export from the DRC and its nine adjoining countries, including: Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Barbados, Belarus, Belgium, Benin, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Bulgaria, Burkina Faso, Cambodia, Cameroon, Canada, Cayman Islands, Chile, China, Colombia, Croatia, Curacao, Cyprus, Czech Republic, Denmark, Dominican Republic, Ecuador, Egypt, El Salvador, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Guatemala, Guinea, Guyana, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Ivory Coast, Japan, Jordan, Kazakhstan, Kenya, Korea, Republic of, Kosovo, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Madagascar, Malaysia, Mali, Malta, Mauritania, Mauritius, Mexico, Mongolia, Morocco, Myanmar, Namibia, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Norway, Pakistan, Panama, Papua New Guinea, Peru, Philippines, Poland, Portugal, Puerto Rico, Romania, Russian Federation, San Marino, Saudi Arabia, Senegal, Serbia, Sierra Leone, Singapore, Slovakia, Solomon Islands, Spain, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Thailand, Togo, Trinidad and Tobago, Tunisia, Turkey, Ukraine, United Arab Emirates, United Kingdom of Great Britain and Northern Ireland, United States of America, Uruguay, Uzbekistan, Vatican City, Venezuela, Vietnam, Yemen, and Zimbabwe.

L2 - RMI Level 2 Countries are those that are known or plausible countries for smuggling, exporting, or transiting of materials containing tantalum, tin, tungsten, or gold out of conflict affected regions, including: Mozambique and South Africa.

L3 - RMI Level 3 Countries are those high-risk countries outlined in Section 1502 of the Dodd-Frank Act as those affected or bordering conflict-affected regions: currently defined as the Democratic Republic of Congo (DRC) and its nine adjoining countries (Angola, Burundi, Central African Republic, Republic of the Congo, Rwanda, South Sudan, Tanzania, Uganda, Zambia).

Future Steps

We have communicated our expectations, as reflected in our Conflict Minerals Policy, to our contract manufacturers and other suppliers. We have continued to engage with our Tier 1 suppliers to update their information on the source and chain of custody of conflict minerals in our supply chain and to require that all smelters utilized agree to participate in the Responsible Minerals Assurance Process or equivalent program.

Forward-Looking Statements

Statements relating to risk mitigation and certain other statements herein are forward-looking in nature and are based on the Company's management's current expectations or beliefs. Furthermore, our reporting obligations under the conflict minerals rules may change in the future and our ability to implement certain processes or obtain information from our suppliers may differ materially from those anticipated or implied in this report. These forward-looking statements are not a guarantee of performance and are subject to a number of uncertainties and other factors that may be outside of the Company's control and that could cause actual events to differ materially from those expressed or implied by the statements made herein. The Company assumes no obligation to update or provide revisions to any forward-looking statements.

Documents Incorporated by Reference

Unless otherwise stated herein, any documents, third-party materials or references to websites (including QuickLogic's) are not incorporated by reference in, or considered to be a part of, this Report, unless expressly incorporated by reference herein.