Please wait
Exhibit 1.01

Delphi Technologies PLC
Conflict Minerals Report
For the Year Ended December 31, 2019


Introduction & Background

This Conflict Minerals Report (“CMR”) for the year ended December 31, 2019 is presented to comply with Rule 13p-1 under the Securities Exchange Act of 1934 (the “Rule”). The Rule imposes certain reporting obligations on U.S. Securities and Exchange Commission (“SEC”) issuers whose manufactured products contain certain minerals which are necessary to the functionality or production of their products. These minerals are cassiterite, columbite-tantalite (coltan), gold, wolframite, and their derivatives, which are limited to tin, tantalum and tungsten (“3TG” or “Conflict Minerals”). The Rule focuses on 3TG emanating from the Democratic Republic of the Congo (“DRC”) region and nine adjoining countries (together, the “Covered Countries”).

This report has been prepared by management of Delphi Technologies PLC (herein referred to as “Delphi,” the “Company,” “we,” “us” or “our”). The information includes the activities of all consolidated subsidiaries in which Delphi holds a controlling financial or management interest. It does not include the activities of non-controlled affiliates that are not required to be consolidated.

Executive Summary of the 2019 Conflict Minerals Program

In order to determine the sources of 3TG in its supply chain, Delphi performed a Reasonable Country of Origin Inquiry (“RCOI”) by surveying a significant portion of our supply base for 3TG use. As a result of these survey procedures, Delphi identified 300 smelters and refineries (herein collectively referred to as “smelters”). Of these 300 smelters, 42 were identified as sourcing, or we had a reason to believe they may be sourcing, from the Covered Countries. We then exercised due diligence procedures over these 42 smelters, and as a result identified that 34 of these 42 smelters have been audited and recognized as conformant with the Responsible Minerals Assurance Process (“RMAP”). The remaining eight smelters were subject to Delphi’s risk mitigation process according to the OECD Due Diligence Guidance for Responsible Supply Chain of Minerals from Conflict-Affected and High-Risk Areas, and as a result, Delphi found no reason to believe that seven of these eight smelters directly or indirectly financed or benefited armed groups in the Covered Countries. Delphi identified some evidence that the remaining smelter, the African Gold Refinery, may be directly or indirectly financing or benefiting armed groups in the Covered Countries. Delphi has initiated action with our suppliers for the removal of all eight of these smelters from our supply chain

I. Company Overview

Delphi is a leader in the development, design and manufacture of vehicle propulsion systems that optimize engine performance, increase vehicle efficiency, reduce emissions, improve driving performance, and support increasing electrification of vehicles. We are a global supplier to original equipment manufacturers (“OEMs”) of both light vehicles (passenger cars, trucks, vans



and sport-utility vehicles) and commercial vehicles (light-duty, medium-duty and heavy-duty trucks; commercial vans; buses and off-highway vehicles). In addition, we manufacture and sell our products and provide value added services to leading aftermarket companies, including independent retailers and wholesale distributors. As of December 31, 2019, we operated 21 manufacturing facilities and 20 technical centers, with a presence in 24 countries.

Products

As of December 31, 2019, our business operated as four segments, grouped on the basis of similar product, market and operating factors:

Fuel Injection Systems - This segment includes gasoline and diesel fuel injection components and systems. Our gasoline fuel injection portfolio includes a full suite of fuel injection technologies - including pumps, injectors, fuel rail assemblies and complete systems - that deliver greater efficiency for traditional and hybrid vehicles with gasoline combustion engines. The Company’s Gasoline Direct Injection (“GDi”) technology provides high-precision fuel delivery for optimized combustion, which lowers emissions and improves fuel economy. Our diesel fuel injection systems portfolio provides enhanced engine performance. The Company’s common rail fuel injection system is the core technology for both on and off-highway commercial and light vehicle applications.

Powertrain Products - This segment includes an array of highly engineered products for traditional combustion and hybrid electric vehicles, including variable valvetrain, smart remote actuators, powertrain sensors, ignition products, canisters, and fuel handling products. These products complement and enhance the efficiency improvements delivered by our fuel injection systems technologies.

Electrification & Electronics - Our electronics portfolio consists of engine and transmission control modules and power electronics. The control modules, containing as much as one million lines of software code, are key components that enable the integration and operation of powertrain products throughout the vehicle. As electrification increases, our proprietary solutions - including supervisory controllers, software, DC/DC converters and inverters - provide better efficiency, reduced weight and lower cost for our OEM customers, while also making these and other components easier to integrate. Manufacturers are also choosing to combine power electronic functionality into one unit, enabling more effective packaging at a lower total cost while increasing Delphi Technologies’ content per vehicle.

Aftermarket - Through this segment we sell products and services to independent aftermarket customers and original equipment service customers. Our aftermarket product portfolio includes a wide range of solutions covering the fuel injection, electronics and engine management, maintenance, and test equipment and vehicle diagnostics categories.





Following completion of our due diligence measures, as described below, it was determined that, like many of our peers in the automotive industry, Delphi’s products contain 3TG materials. Delphi considers these 3TG materials necessary to the functionality or production of a significant portion of our manufactured products in all of our operating segments. Delphi has designed and implemented a Conflict Minerals process, including performance of due diligence measures, to be consistent, in all material respects, with the Organisation for Economic Co-operation and Development (“OECD”) Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas: Third Edition, including the related supplements on tantalum, tin, tungsten and gold (the “OECD Guidance”).

II. Reasonable Country of Origin Inquiry

We procure our raw materials and components from a variety of suppliers around the world. We rely on our direct suppliers to provide information on the source of the 3TG materials contained in components and materials supplied to us - including sources of 3TG that are supplied to them from upstream suppliers.

In order to understand the sources of 3TG in our supply chain, we performed an RCOI. Delphi’s RCOI process involved two stages: Supplier RCOI, which was designed and performed in accordance with Step 2A of the OECD Guidance, and Smelter RCOI, which was designed and performed in accordance with Steps 2B, C, and D of the OECD Guidance.

Supplier RCOI

Delphi designed its Supplier RCOI process to identify, to the best of its efforts, the smelters of 3TG within Delphi’s supply chain in accordance with Step 2A of the OECD Guidance. Delphi conducted a good faith, risk-based applicability assessment of its supply base to identify those suppliers that were reasonably believed to supply products or components to us that may contain 3TG from one or more of the Covered Countries. Delphi identified the suppliers based on information in its material data system, including the International Material Data System (“IMDS”), assessments by Delphi purchasing and materials personnel and prior year supplier CMRT submissions. Delphi’s supplier RCOI process included surveying the identified relevant suppliers (which represented 393 suppliers and/or original manufacturers that supply parts and materials for products manufactured by Delphi that we believe may contain 3TG). Delphi’s 2019 RCOI process was designed to include substantially all of the parts and materials necessary to the functionality or production of products manufactured by Delphi in 2019. Delphi did not include suppliers of indirect material, such as packaging or office supplies, or providers of services, in its supplier survey.

These relevant suppliers and original manufacturers were contacted, provided with Delphi’s Conflict Minerals policy, and requested to disclose to us the sources of 3TG materials used in the products sold to us, including smelter information, via the Conflict Minerals Reporting Template (“CMRT”) developed by the Responsible Minerals Initiative (“RMI”). We reviewed all supplier responses for completeness and accuracy. For suppliers that did not provide adequate responses, where additional follow-up was needed based on the Company’s internal risk assessment



methodology, or if responses were not provided in a timely manner, we actively solicited clarifications and responses.

Our 2019 RCOI and supplier response results represented approximately 95% of the Company’s total Annual Purchase Value (“APV”) from the relevant suppliers. After review of these responses, Delphi consolidated the supplier responses into a single list of unique smelter names which met the definition of a smelter under one of three industry recognized audit protocols. We then reviewed this listing of smelters and compared it to the RMI list of known smelters as well as industry peers in order to determine if we had identified reasonably all of the smelters in our supply chain. As a result of the supplier RCOI process, 300 smelters of 3TG were identified by our suppliers.

The large majority of the CMRT responses received from our suppliers provided data to us at a total company level, and our suppliers were unable to specify the smelters or refiners used for the specific components supplied to us during the reporting period. We are therefore unable to determine whether the 3TGs reported by our suppliers were contained in components or parts supplied to us during the reporting period. We are also unable to verify that all of the 3TG smelters that our suppliers identified were part of our supply chain. Based on the information provided by our suppliers, we made a reasonable good faith effort to collect and evaluate the information concerning 3TG smelters in our supply chain.

Smelter RCOI

Delphi assessed the country of origin information for the 300 smelters identified by our suppliers, and determined that 42 of these smelters either source, or Delphi had a reason to believe they may source, 3TG from the Covered Countries. Due to the overlap between smelter RCOI and smelter due diligence, our smelter RCOI process is summarized below in the Due Diligence section of this report.

III. Due Diligence Process

Establishment of Strong Company Management Systems (OECD Step 1)

Company Policies (1A) - Delphi has adopted a Conflict Minerals Policy which is publicly available at https://delphi.portal.covisint.com/documents/107627/21076351/DelphiTechnologiesConflictMineralsPolicy.pdf/b00e7020-bbd2-4bec-8998-f8caf27dbac1. Delphi communicated its policy directly to its suppliers as part of the RCOI process, as further described below.




Internal Management Team (1B) - We maintain a cross-functional Conflict Minerals Team to support Delphi’s supply chain due diligence and the implementation and monitoring of an effective Conflict Minerals program, including compliance activities associated with the Rule. The Conflict Minerals Team periodically reports the status of Delphi’s Conflict Minerals program to a Conflict Minerals Steering Committee comprised of designated senior management members, including the Senior Vice President, General Counsel, Secretary and Chief Compliance Officer and the Vice President of Global Purchasing.

System of Supply Chain Controls and Transparency (1C) - We established a system of controls over the Company’s mineral supply chain, including the implementation of a process to collect information to perform the RCOI and due diligence procedures described below, as well as a risk assessment methodology designed to define, identify, mitigate and manage risks. Should a risk arise, it would be reported to the designated members of senior management that comprise the Conflict Minerals Steering Committee.

Delphi supports an industry-wide approach to addressing social responsibility matters regarding Conflict Minerals. During the 2019 reporting period, Delphi was an active member in the Automotive Industry Action Group (“AIAG”).

Supplier Engagement (1D) - Due to our size and the nature of our products, and the corresponding size and depth of our supply chain, it is difficult to identify actors upstream from our direct suppliers. We rely on our suppliers to provide us with information concerning the source and chain of custody of 3TG contained in the products and components they supply. Many of our suppliers are also subject to the Rule, and they rely on information provided by their upstream suppliers. Our standard global contract terms and conditions require suppliers to provide information with respect to the origin of their products supplied to Delphi. We also communicated with suppliers regarding our Conflict Minerals program, as detailed in this Conflict Minerals Report, which included direct engagement with our suppliers to collect required supplier and smelter RCOI and due diligence data, as further described below. This engagement included providing training to our suppliers on our Conflict Minerals program, if such assistance was requested by a supplier. We continue to maintain and communicate to our suppliers a dedicated email address (CM@Delphi.com) to facilitate supplier communication with us regarding Conflict Minerals.

As a downstream entity, we drive responsible sourcing through our supply chain by exercising due diligence over our suppliers’ sourcing of raw materials in their upstream supply chains. We mitigate risks associated with the sourcing of 3TGs by working with our suppliers to identify 3TG smelters and refiners and encouraging those facilities to become RMAP Conformant. We also support broader industry efforts to promote responsible mining and sourcing, as further described above.




Grievance Mechanism (1E) - We have grievance mechanisms through which our employees and suppliers can report suspected or potential violations of our policies, laws or general ethics or compliance concerns. We maintain an e-mail address (CM@Delphi.com) for suppliers to ask questions, voice concerns and report violations with respect to our Conflict Minerals program. Delphi also maintains a reporting system that allows employees and others to ask questions, voice concerns and report violations with respect to Delphi policies confidentially and anonymously.


Identification and Assessment of Risks in the Supply Chain (OECD Step 2)

As described in the Reasonable Country of Origin section above, we surveyed our supply base to identify the smelters in their supply chain, as well as the country of origin, source and chain of custody of 3TGs in order to identify each of the smelters that placed conflict minerals into our supply chain, which we believed would facilitate our ability to identify the source and chain of custody of the conflict minerals contained in our products.

Design and Implement a Strategy to Respond to Risks (OECD Step 3)

In response to the risk assessment described in the foregoing section, Delphi has an approved risk management process through which the conflict minerals program is implemented, managed and monitored. Delphi performs risk mitigation on any high-risk smelter (smelters that are identified as sourcing, or believed to be sourcing, from the Covered Countries) that is not recognized as RMAP Conformant. Delphi’s risk mitigation process was designed in accordance with Step 3B of the OECD Guidance and is reported to the designated members of senior management that comprise the Conflict Minerals Steering Committee in accordance with Step 3A of the OECD Guidance. If there is reason to believe the smelters subject to Delphi’s risk mitigation process were directly or indirectly financing or benefiting armed groups in the Covered Countries, Delphi would initiate action with our suppliers for the removal of this smelter from our supply base, which is consistent with Step 3B of the OECD Guidance and helps prevent unnecessary boycotts of the Covered Countries.

Third Party Audit of Supply Chain Due Diligence (OECD Step 4)

Delphi utilizes a third party conflict minerals service which relies on the publicly available list of RMAP conformant smelters published by the RMI.

Annual Reporting on Supply Chain Due Diligence (OECD Step 5)

Delphi’s Form SD and CMR are filed annually with the SEC, and a copy of the CMR is publicly available on the Company’s website in the Financial Information section of the Investors page at http://ir.delphi.com.




IV. Due Diligence Performance and Results

Delphi exercised due diligence on the source and chain of custody of all 3TGs that Delphi identified as sourced, or had reason to believe may have been sourced, from the Covered Countries in accordance with a nationally or internationally recognized due diligence framework.

Delphi designed its smelter RCOI and due diligence processes in accordance with the applicable sections of Steps 2, 3 and 4 of the OECD Guidance. Based on its assessment of the survey responses received from suppliers as part of its RCOI process, Delphi performed smelter RCOI and due diligence measures as described below in a manner consistent with the OECD Guidance on the smelters that were identified by our suppliers as potential sources of 3TG in our products.

For each 3TG smelter that was identified by our suppliers as being in Delphi’s supply chain, Delphi, through its third party conflict minerals service, attempted to directly engage the smelter to determine whether or not the smelter sourced from the Covered Countries. For smelters that did not respond to direct engagement, Delphi reviewed publicly available information to determine if there was any reason to believe that the smelter may have sourced 3TG from the Covered Countries during the reporting period. This information included the most recent report by the United Nations (“U.N.”) Group of Experts on the Democratic Republic of the Congo, publications by non-governmental organizations the Enough Project, Global Witness, Southern Africa Resource Watch and Radio Okapi (the U.N. funded news organization in the conflict region of the DRC) and a search of other publicly available information. For smelters that declared directly (e.g. through correspondence, publicly available conflict minerals policy, or information available on their website), or through their relevant industry association, that they did not source from the Covered Countries, and were not recognized as RMAP Conformant, Delphi reviewed the publicly available information sources listed above to determine if there was any contrary evidence to the smelter’s declaration.

Due Diligence Results

As a result of these procedures, 42 of the 300 smelters identified by our suppliers either source, or Delphi had reason to believe they may source, 3TG from the Covered Countries. The countries of origin of 3TG from these 42 smelters may include the DRC, Rwanda, Burundi, Tanzania, and Uganda.

Of these 42 smelters, 34 smelters were conformant with the RMAP and were accordingly listed on the RMI’s website as RMAP Conformant, meaning that the smelters have been determined to be conformant with the RMAP’s, or an equivalent, independent third-party audit program.




The following table categorizes the smelters identified by our suppliers as being in our supply chain by 3TG mineral, those identified as sourcing from the Covered Countries and RMAP status:
 
Covered Country Sourced
 
Non-Covered Country Sourced
 
 
 
RMAP Conformant
 
RMAP Active or TI-CMC Member
 
Not RMAP Conformant
 
Total
 
RMAP Conformant
 
RMAP Active or TI-CMC Member
 
Not RMAP Conformant
 
Total
 
Total Smelters
Gold
8
 
 
8
 
16
 
88
 
1
 
52
 
141
 
157
Tantalum
19
 
 
 
19
 
17
 
1
 
2
 
20
 
39
Tin
2
 
 
 
2
 
35
 
 
20
 
55
 
57
Tungsten
5
 
 
 
5
 
25
 
1
 
16
 
42
 
47
Total
34
 
 
8
 
42
 
165
 
3
 
90
 
258
 
300

All compliance status information in the above table is as of March 4, 2020, and is based solely on information made publicly available by the RMI and listed on the RMI website, without independent verification by us. “Conformant” means that the smelter was listed as conformant with the RMAP assessment protocols. “Active” means that the smelter has committed to undergo an RMAP audit or is participating in one of the cross-recognized certification programs, such as members of the Tungsten Industry-Conflict Minerals Council (“TI-CMC”). Smelters not listed as Conformant or Active are classified as “Not RMAP Conformant”. Sourcing status information is based on information received directly from the smelters, information received through the RMAP and/or the other public information sources listed above. Included in “Covered Country Sourced” are smelters which Delphi had reason to believe may source from the Covered Countries and included in “Non-Covered Country Sourced” are smelters which Delphi had no reason to believe source from the Covered Countries.

The mines used by these smelters are not publicly available and were not disclosed by these smelters. Through experience gained from participating in the RMI, we have concluded that requiring our suppliers to complete the CMRT and conducting the due diligence process described above represents the most reasonable best effort we can make at this time to identify the mines and countries of origin of 3TGs contained in our products with the greatest possible specificity.

Risk Mitigation

Delphi conducted risk mitigation on the smelters that were identified as sourcing, or believed to be sourcing, from the Covered Countries and that were not recognized as RMAP Conformant. Delphi’s risk mitigation was designed in accordance with Step 3B of the OECD Guidance and was reported to the designated members of senior management that comprise the Conflict Minerals Steering Committee in accordance with Step 3A of the OECD Guidance.

Delphi conducted risk mitigation on eight gold smelters that Delphi had reason to believe may source from the Covered Countries. Based on the information provided by our suppliers, the gold provided by these smelters may have been included in products manufactured by the Company in 2019.




Delphi’s risk mitigation process included performing additional due diligence to determine if there was any reason to believe the smelter directly or indirectly financed or benefited armed groups in the Covered Countries. This additional due diligence included further review of the publicly available information sources noted above in order to determine if there was any reason to believe the smelter directly or indirectly financed or benefited armed groups in the Covered Countries, verifying with internal stakeholders and relevant suppliers whether 3TGs from the smelter were actually in Delphi’s supply chain in the 2019 reporting period and direct engagement with each high risk smelter to verify risk and to encourage the smelter to become RMAP Conformant. As a result of this process, Delphi found no reason to believe seven of eight high risk gold smelters directly or indirectly financed or benefited armed groups in the Covered Countries. Delphi identified some information that the African Gold Refinery may be directly or indirectly financing or benefiting armed groups in the Covered Countries. Delphi has initiated action with our suppliers for the removal of all eight of these smelters from our supply base, which is consistent with Step 3B of the OECD Guidance and helps prevent unnecessary boycotts of the Covered Countries.

Continuous Improvement of Supply Chain Due Diligence

The activities undertaken by Delphi as described in this report have helped to mitigate the risk that the 3TG materials necessary to our products benefited armed groups in the Covered Countries. Going forward, we intend to take the following steps to improve our due diligence process and further mitigate the risk that the 3TG materials necessary to our products benefit armed groups:

1) Continue to strengthen our engagement with our suppliers regarding Conflict Minerals, including requiring CMRT information from key suppliers and any new supplier;

2) Continue to drive our suppliers to obtain current, accurate, and complete information from their supply chain about their smelters and refiners of Conflict Minerals; and

3) Encourage smelters identified as part of our supply chain which are sourcing, or believed to be sourcing, from the Covered Countries to be audited and certified to a protocol recognized by the RMAP, either directly or indirectly through suppliers and/or relevant industry partnerships, including follow-up in 2020 on smelters that required risk mitigation in 2019.

Additional Risk Factors

The statements within this CMR are based on the RCOI process and due diligence performed in good faith by Delphi, and are based on the information available at the time. A number of factors could introduce errors or otherwise affect the statements made within. These factors include, but are not limited to, gaps in supplier data, gaps in smelter data, errors or omissions in information provided by suppliers, errors or omissions in information provided by smelters, confusion by suppliers over requirements of the SEC final rule, gaps in supplier education and knowledge, errors or omissions in public information, translation of public data, oversights or errors in conflict-free smelter audits, Covered Country-sourced materials being declared secondary



materials, illegally tagged conflict minerals from Covered Countries being introduced into the supply chain, and smuggling of Conflict Minerals from Covered Countries to countries beyond the Covered Countries.



Appendix to the 2019 Conflict Minerals Report of Delphi Technologies PLC Processing Facilities Identified in Supplier CMRT Responses

The following table lists the name and 3TG of the processing facilities identified in supplier CMRT responses to Delphi as part of its 2019 reasonable country of origin inquiry as described in the CMR. All information in the following table is based on information made publicly available by the RMI and listed on the RMI website as of March 4, 2020.

3TG Metal
Standard Smelter Name
Smelter ID
Gold
8853 S.p.A.
CID002763
Gold
Abington Reldan Metals, LLC
CID002708
Gold
Advanced Chemical Company
CID000015
Gold
African Gold Refinery
CID003185
Gold
Aida Chemical Industries Co., Ltd.
CID000019
Gold
Al Etihad Gold Refinery DMCC
CID002560
Gold
Allgemeine Gold-und Silberscheideanstalt A.G.
CID000035
Gold
Almalyk Mining and Metallurgical Complex (AMMC)
CID000041
Gold
AngloGold Ashanti Córrego do Sítio Mineração
CID000058
Gold
Argor-Heraeus S.A.
CID000077
Gold
Asahi Pretec Corp.
CID000082
Gold
Asahi Refining Canada Ltd.
CID000924
Gold
Asahi Refining USA Inc.
CID000920
Gold
Asaka Riken Co., Ltd.
CID000090
Gold
Atasay Kuyumculuk Sanayi Ve Ticaret A.S.
CID000103
Gold
AU Traders and Refiners
CID002850
Gold
Aurubis AG
CID000113
Gold
Bangalore Refinery
CID002863
Gold
Bangko Sentral ng Pilipinas (Central Bank of the Philippines)
CID000128
Gold
Boliden AB
CID000157
Gold
C. Hafner GmbH + Co. KG
CID000176
Gold
Caridad
CID000180
Gold
CCR Refinery - Glencore Canada Corporation
CID000185
Gold
Cendres + Métaux S.A.
CID000189
Gold
CGR Metalloys Pvt Ltd.
CID003382
Gold
Chimet S.p.A.
CID000233
Gold
Chugai Mining
CID000264
Gold
Daye Non-Ferrous Metals Mining Ltd.
CID000343
Gold
Degussa Sonne / Mond Goldhandel GmbH
CID002867
Gold
Dijllah Gold Refinery FZC
CID003348
Gold
DODUCO Contacts and Refining GmbH
CID000362
Gold
Dowa
CID000401



Gold
DS PRETECH Co., Ltd.
CID003195
Gold
DSC (Do Sung Corporation)
CID000359
Gold
Eco-System Recycling Co., Ltd. East Plant
CID000425
Gold
Eco-System Recycling Co., Ltd. North Plant
CID003424
Gold
Eco-System Recycling Co., Ltd. West Plant
CID003425
Gold
Emirates Gold DMCC
CID002561
Gold
Fidelity Printers and Refiners Ltd.
CID002515
Gold
Fujairah Gold FZC
CID002584
Gold
Geib Refining Corporation
CID002459
Gold
Gold Refinery of Zijin Mining Group Co., Ltd.
CID002243
Gold
Great Wall Precious Metals Co., Ltd. of CBPM
CID001909
Gold
Guangdong Jinding Gold Limited
CID002312
Gold
Gujarat Gold Centre
CID002852
Gold
Guoda Safina High-Tech Environmental Refinery Co., Ltd.
CID000651
Gold
Hangzhou Fuchunjiang Smelting Co., Ltd.
CID000671
Gold
HeeSung Metal Ltd.
CID000689
Gold
Heimerle + Meule GmbH
CID000694
Gold
Henan Yuguang Gold & Lead Co., Ltd.
CID002519
Gold
Heraeus Metals Hong Kong Ltd.
CID000707
Gold
Heraeus Precious Metals GmbH & Co. KG
CID000711
Gold
Hunan Chenzhou Mining Co., Ltd.
CID000767
Gold
Hunan Guiyang yinxing Nonferrous Smelting Co., Ltd.
CID000773
Gold
HwaSeong CJ Co., Ltd.
CID000778
Gold
Inner Mongolia Qiankun Gold and Silver Refinery Share Co., Ltd.
CID000801
Gold
International Precious Metal Refiners
CID002562
Gold
Ishifuku Metal Industry Co., Ltd.
CID000807
Gold
Istanbul Gold Refinery
CID000814
Gold
Italpreziosi
CID002765
Gold
Japan Mint
CID000823
Gold
Jiangxi Copper Co., Ltd.
CID000855
Gold
JSC Novosibirsk Refinery
CID000493
Gold
JSC Uralelectromed
CID000929
Gold
JX Nippon Mining & Metals Co., Ltd.
CID000937
Gold
Kaloti Precious Metals
CID002563
Gold
Kazakhmys Smelting LLC
CID000956
Gold
Kazzinc
CID000957
Gold
Kennecott Utah Copper LLC
CID000969
Gold
KGHM Polska Miedź Spółka Akcyjna
CID002511
Gold
Kojima Chemicals Co., Ltd.
CID000981



Gold
Korea Zinc Co., Ltd.
CID002605
Gold
Kyrgyzaltyn JSC
CID001029
Gold
Kyshtym Copper-Electrolytic Plant ZAO
CID002865
Gold
L’azurde Company For Jewelry
CID001032
Gold
L’Orfebre S.A.
CID002762
Gold
Lingbao Gold Co., Ltd.
CID001056
Gold
Lingbao Jinyuan Tonghui Refinery Co., Ltd.
CID001058
Gold
LS-NIKKO Copper Inc.
CID001078
Gold
Luoyang Zijin Yinhui Gold Refinery Co., Ltd.
CID001093
Gold
Marsam Metals
CID002606
Gold
Materion
CID001113
Gold
Matsuda Sangyo Co., Ltd.
CID001119
Gold
Metalor Technologies (Hong Kong) Ltd.
CID001149
Gold
Metalor Technologies (Singapore) Pte., Ltd.
CID001152
Gold
Metalor Technologies (Suzhou) Ltd.
CID001147
Gold
Metalor Technologies S.A.
CID001153
Gold
Metalor USA Refining Corporation
CID001157
Gold
Metalúrgica Met-Mex Peñoles S.A. De C.V.
CID001161
Gold
Mitsubishi Materials Corporation
CID001188
Gold
Mitsui Mining and Smelting Co., Ltd.
CID001193
Gold
MMTC-PAMP India Pvt., Ltd.
CID002509
Gold
Modeltech Sdn Bhd
CID002857
Gold
Morris and Watson
CID002282
Gold
Moscow Special Alloys Processing Plant
CID001204
Gold
Nadir Metal Rafineri San. Ve Tic. A.Ş.
CID001220
Gold
Navoi Mining and Metallurgical Combinat
CID001236
Gold
NH Recytech Company
CID003189
Gold
Nihon Material Co., Ltd.
CID001259
Gold
Ögussa Österreichische Gold- und Silber-Scheideanstalt GmbH
CID002779
Gold
Ohura Precious Metal Industry Co., Ltd.
CID001325
Gold
OJSC “The Gulidov Krasnoyarsk Non-Ferrous Metals Plant” (OJSC Krastsvetmet)
CID001326
Gold
PAMP S.A.
CID001352
Gold
Pease & Curren
CID002872
Gold
Penglai Penggang Gold Industry Co., Ltd.
CID001362
Gold
Planta Recuperadora de Metales SpA
CID002919
Gold
Prioksky Plant of Non-Ferrous Metals
CID001386
Gold
PT Aneka Tambang (Persero) Tbk
CID001397
Gold
PX Précinox S.A.
CID001498
Gold
QG Refining, LLC
CID003324



Gold
Rand Refinery (Pty) Ltd.
CID001512
Gold
Refinery of Seemine Gold Co., Ltd.
CID000522
Gold
REMONDIS PMR B.V.
CID002582
Gold
Royal Canadian Mint
CID001534
Gold
SAAMP
CID002761
Gold
Sabin Metal Corp.
CID001546
Gold
Safimet S.p.A
CID002973
Gold
SAFINA A.S.
CID002290
Gold
Sai Refinery
CID002853
Gold
Samduck Precious Metals
CID001555
Gold
SAMWON Metals Corp.
CID001562
Gold
SAXONIA Edelmetalle GmbH
CID002777
Gold
SEMPSA Joyería Platería S.A.
CID001585
Gold
Shandong Humon Smelting Co., Ltd.
CID002525
Gold
Shandong Tiancheng Biological Gold Industrial Co., Ltd.
CID001619
Gold
Shandong Zhaojin Gold & Silver Refinery Co., Ltd.
CID001622
Gold
Shenzhen Zhonghenglong Real Industry Co., Ltd.
CID002527
Gold
Sichuan Tianze Precious Metals Co., Ltd.
CID001736
Gold
Singway Technology Co., Ltd.
CID002516
Gold
SOE Shyolkovsky Factory of Secondary Precious Metals
CID001756
Gold
Solar Applied Materials Technology Corp.
CID001761
Gold
Sovereign Metals
CID003383
Gold
State Research Institute Center for Physical Sciences and Technology
CID003153
Gold
Sudan Gold Refinery
CID002567
Gold
Sumitomo Metal Mining Co., Ltd.
CID001798
Gold
SungEel HiMetal Co., Ltd.
CID002918
Gold
Super Dragon Technology Co., Ltd.
CID001810
Gold
T.C.A S.p.A
CID002580
Gold
Tanaka Kikinzoku Kogyo K.K.
CID001875
Gold
The Refinery of Shandong Gold Mining Co., Ltd.
CID001916
Gold
Tokuriki Honten Co., Ltd.
CID001938
Gold
Tongling Nonferrous Metals Group Co., Ltd.
CID001947
Gold
Tony Goetz NV
CID002587
Gold
TOO Tau-Ken-Altyn
CID002615
Gold
Torecom
CID001955
Gold
Umicore Brasil Ltda.
CID001977
Gold
Umicore Precious Metals Thailand
CID002314
Gold
Umicore S.A. Business Unit Precious Metals Refining
CID001980
Gold
United Precious Metal Refining, Inc.
CID001993



Gold
Valcambi S.A.
CID002003
Gold
Western Australian Mint (T/a The Perth Mint)
CID002030
Gold
WIELAND Edelmetalle GmbH
CID002778
Gold
Yamakin Co., Ltd.
CID002100
Gold
Yokohama Metal Co., Ltd.
CID002129
Gold
Yunnan Copper Industry Co., Ltd.
CID000197
Gold
Zhongkuang Gold Industry Co., Ltd.
CID002214
Gold
Zhongyuan Gold Smelter of Zhongjin Gold Corporation
CID002224
Tantalum
Asaka Riken Co., Ltd.
CID000092
Tantalum
Changsha South Tantalum Niobium Co., Ltd.
CID000211
Tantalum
CP Metals Inc.
CID003402
Tantalum
D Block Metals, LLC
CID002504
Tantalum
Exotech Inc.
CID000456
Tantalum
F&X Electro-Materials Ltd.
CID000460
Tantalum
FIR Metals & Resource Ltd.
CID002505
Tantalum
Global Advanced Metals Aizu
CID002558
Tantalum
Global Advanced Metals Boyertown
CID002557
Tantalum
Guangdong Zhiyuan New Material Co., Ltd.
CID000616
Tantalum
H.C. Starck Co., Ltd.
CID002544
Tantalum
H.C. Starck Hermsdorf GmbH
CID002547
Tantalum
H.C. Starck Inc.
CID002548
Tantalum
H.C. Starck Ltd.
CID002549
Tantalum
H.C. Starck Smelting GmbH & Co. KG
CID002550
Tantalum
H.C. Starck Tantalum and Niobium GmbH
CID002545
Tantalum
Hengyang King Xing Lifeng New Materials Co., Ltd.
CID002492
Tantalum
Jiangxi Dinghai Tantalum & Niobium Co., Ltd.
CID002512
Tantalum
Jiangxi Tuohong New Raw Material
CID002842
Tantalum
JiuJiang JinXin Nonferrous Metals Co., Ltd.
CID000914
Tantalum
Jiujiang Tanbre Co., Ltd.
CID000917
Tantalum
Jiujiang Zhongao Tantalum & Niobium Co., Ltd.
CID002506
Tantalum
KEMET Blue Metals
CID002539
Tantalum
KEMET Blue Powder
CID002568
Tantalum
LSM Brasil S.A.
CID001076
Tantalum
Metallurgical Products India Pvt., Ltd.
CID001163
Tantalum
Mineração Taboca S.A.
CID001175
Tantalum
Mitsui Mining & Smelting
CID001192
Tantalum
Ningxia Orient Tantalum Industry Co., Ltd.
CID001277
Tantalum
NPM Silmet AS
CID001200
Tantalum
Power Resources Ltd.
CID002847
Tantalum
QuantumClean
CID001508



Tantalum
Resind Indústria e Comércio Ltda.
CID002707
Tantalum
RFH Tantalum Smeltery Co., Ltd./Yanling Jincheng Tantalum & Niobium Co., Ltd.
CID001522
Tantalum
Solikamsk Magnesium Works OAO
CID001769
Tantalum
Taki Chemical Co., Ltd.
CID001869
Tantalum
Telex Metals
CID001891
Tantalum
Ulba Metallurgical Plant JSC
CID001969
Tantalum
XinXing HaoRong Electronic Material Co., Ltd.
CID002508
Tin
Alpha
CID000292
Tin
An Vinh Joint Stock Mineral Processing Company
CID002703
Tin
Chenzhou Yunxiang Mining and Metallurgy Co., Ltd.
CID000228
Tin
Chifeng Dajingzi Tin Industry Co., Ltd.
CID003190
Tin
China Tin Group Co., Ltd.
CID001070
Tin
Dongguan CiEXPO Environmental Engineering Co., Ltd.
CID003356
Tin
Dowa
CID000402
Tin
Electro-Mechanical Facility of the Cao Bang Minerals & Metallurgy Joint Stock Company
CID002572
Tin
EM Vinto
CID000438
Tin
Estanho de Rondônia S.A.
CID000448
Tin
Fenix Metals
CID000468
Tin
Gejiu City Fuxiang Industry and Trade Co., Ltd.
CID003410
Tin
Gejiu Fengming Metallurgy Chemical Plant
CID002848
Tin
Gejiu Kai Meng Industry and Trade LLC
CID000942
Tin
Gejiu Non-Ferrous Metal Processing Co., Ltd.
CID000538
Tin
Gejiu Yunxin Nonferrous Electrolysis Co., Ltd.
CID001908
Tin
Gejiu Zili Mining And Metallurgy Co., Ltd.
CID000555
Tin
Guangdong Hanhe Non-Ferrous Metal Co., Ltd.
CID003116
Tin
Guanyang Guida Nonferrous Metal Smelting Plant
CID002849
Tin
HuiChang Hill Tin Industry Co., Ltd.
CID002844
Tin
Huichang Jinshunda Tin Co., Ltd.
CID000760
Tin
Jiangxi New Nanshan Technology Ltd.
CID001231
Tin
Ma’anshan Weitai Tin Co., Ltd.
CID003379
Tin
Magnu’s Minerais Metais e Ligas Ltda.
CID002468
Tin
Malaysia Smelting Corporation (MSC)
CID001105
Tin
Melt Metais e Ligas S.A.
CID002500
Tin
Metallic Resources, Inc.
CID001142
Tin
Metallo Belgium N.V.
CID002773
Tin
Metallo Spain S.L.U.
CID002774
Tin
Mineração Taboca S.A.
CID001173
Tin
Minsur
CID001182



Tin
Mitsubishi Materials Corporation
CID001191
Tin
Modeltech Sdn Bhd
CID002858
Tin
Nghe Tinh Non-Ferrous Metals Joint Stock Company
CID002573
Tin
O.M. Manufacturing (Thailand) Co., Ltd.
CID001314
Tin
O.M. Manufacturing Philippines, Inc.
CID002517
Tin
Operaciones Metalúrgicas S.A.
CID001337
Tin
Pongpipat Company Limited
CID003208
Tin
Precious Minerals and Smelting Limited
CID003409
Tin
PT Artha Cipta Langgeng
CID001399
Tin
PT ATD Makmur Mandiri Jaya
CID002503
Tin
PT Mitra Stania Prima
CID001453
Tin
PT Refined Bangka Tin
CID001460
Tin
PT Timah Tbk Kundur
CID001477
Tin
PT Timah Tbk Mentok
CID001482
Tin
Resind Indústria e Comércio Ltda.
CID002706
Tin
Rui Da Hung
CID001539
Tin
Soft Metais Ltda.
CID001758
Tin
Super Ligas
CID002756
Tin
Thai Nguyen Mining and Metallurgy Co., Ltd.
CID002834
Tin
Thaisarco
CID001898
Tin
Tin Technology & Refining
CID003325
Tin
Tuyen Quang Non-Ferrous Metals Joint Stock Company
CID002574
Tin
White Solder Metalurgia e Mineração Ltda.
CID002036
Tin
Yunnan Chengfeng Non-ferrous Metals Co., Ltd.
CID002158
Tin
Yunnan Tin Company Limited
CID002180
Tin
Yunnan Yunfan Non-ferrous Metals Co., Ltd.
CID003397
Tungsten
A.L.M.T. TUNGSTEN Corp.
CID000004
Tungsten
ACL Metais Eireli
CID002833
Tungsten
Asia Tungsten Products Vietnam Ltd.
CID002502
Tungsten
Chenzhou Diamond Tungsten Products Co., Ltd.
CID002513
Tungsten
Chongyi Zhangyuan Tungsten Co., Ltd.
CID000258
Tungsten
CNMC (Guangxi) PGMA Co., Ltd.
CID000281
Tungsten
Fujian Ganmin RareMetal Co., Ltd.
CID003401
Tungsten
Fujian Jinxin Tungsten Co., Ltd.
CID000499
Tungsten
Ganzhou Haichuang Tungsten Co., Ltd.
CID002645
Tungsten
Ganzhou Huaxing Tungsten Products Co., Ltd.
CID000875
Tungsten
Ganzhou Jiangwu Ferrotungsten Co., Ltd.
CID002315
Tungsten
Ganzhou Seadragon W & Mo Co., Ltd.
CID002494
Tungsten
Global Tungsten & Powders Corp.
CID000568
Tungsten
Guangdong Xianglu Tungsten Co., Ltd.
CID000218



Tungsten
H.C. Starck Smelting GmbH & Co. KG
CID002542
Tungsten
H.C. Starck Tungsten GmbH
CID002541
Tungsten
Hunan Chenzhou Mining Co., Ltd.
CID000766
Tungsten
Hunan Chuangda Vanadium Tungsten Co., Ltd. Wuji
CID002579
Tungsten
Hunan Chunchang Nonferrous Metals Co., Ltd.
CID000769
Tungsten
Hunan Litian Tungsten Industry Co., Ltd.
CID003182
Tungsten
Hydrometallurg, JSC
CID002649
Tungsten
Japan New Metals Co., Ltd.
CID000825
Tungsten
Jiangwu H.C. Starck Tungsten Products Co., Ltd.
CID002551
Tungsten
Jiangxi Dayu Longxintai Tungsten Co., Ltd.
CID002647
Tungsten
Jiangxi Gan Bei Tungsten Co., Ltd.
CID002321
Tungsten
Jiangxi Minmetals Gao’an Non-ferrous Metals Co., Ltd.
CID002313
Tungsten
Jiangxi Tonggu Non-ferrous Metallurgical & Chemical Co., Ltd.
CID002318
Tungsten
Jiangxi Xinsheng Tungsten Industry Co., Ltd.
CID002317
Tungsten
Jiangxi Yaosheng Tungsten Co., Ltd.
CID002316
Tungsten
JSC “Kirovgrad Hard Alloys Plant”
CID003408
Tungsten
Kennametal Fallon
CID000966
Tungsten
Kennametal Huntsville
CID000105
Tungsten
KGETS Co., Ltd.
CID003388
Tungsten
Lianyou Metals Co., Ltd.
CID003407
Tungsten
Malipo Haiyu Tungsten Co., Ltd.
CID002319
Tungsten
Masan Tungsten Chemical LLC (MTC)
CID002543
Tungsten
Moliren Ltd.
CID002845
Tungsten
Niagara Refining LLC
CID002589
Tungsten
Philippine Chuangxin Industrial Co., Inc.
CID002827
Tungsten
Tejing (Vietnam) Tungsten Co., Ltd.
CID001889
Tungsten
Unecha Refractory Metals Plant
CID002724
Tungsten
Wolfram Bergbau und Hütten AG
CID002044
Tungsten
Woltech Korea Co., Ltd.
CID002843
Tungsten
Xiamen Tungsten (H.C.) Co., Ltd.
CID002320
Tungsten
Xiamen Tungsten Co., Ltd.
CID002082
Tungsten
Xinfeng Huarui Tungsten & Molybdenum New Material Co., Ltd.
CID002830
Tungsten
Xinhai Rendan Shaoguan Tungsten Co., Ltd.
CID002095